Amptech Systems & TUBETVSHOP.COM

&

 

Parts Reproductions

Amptech Systems proudly introduces our line of reproduction sheet metal parts for vintage televisions.  Quality construction and attention to detail are standard practices.  We have a continuously-expanding line of parts such as back covers and high voltage cages.  Here is our current line.

Regular Production -- Items in this section are Regular Production parts, of which we keep some inventory in stock at all times and order in batches of significant quantity.  Pricing reflects their Regular Stock status.

FP71985R Rubber protective "feet" as used on underside of many tabletop television sets' cabinets.  White in color, but otherwise identical to OEM part number 71985 as used on RCA 630TS, 8TS30 (also fits Fada TV-30, 799, 899, Crosley 307TA, 9-408, many other makes/models using a 7/8" diameter 7/16" high solid rubber "foot" mounted via washer and #6 wood screw.  Set of 4 pieces.  Note:  Original was black rubber, reproductions are white rubber.

Price $9.99 (set of 4)

Email to Order

 

BC630R Reproduction back cover fits RCA models 630TS, 8TS30, Crosley models 307TA, 9-408 and other similar makes and models based on the 30-tube RCA KCS-20 and RCA-licensed third-party versions.  Replaces OEM part number 71860.   

Price $74.99

 

BC721R Reproduction back cover fits RCA model 721TS.  Replaces OEM part number 72786.

Price $74.99

 

BC621R Reproduction back cover fits RCA model 621TS.  Replaces OEM part number 72427.

Price $74.99

 

BC730R Reproduction back cover fits Fada models TV-30, 799, 899, and similar (10 inch CRT) models based on the 30-tube RCA "KCS-20" receiver chassis design.  Mounting hole positions differ on Fada models from those models which the BC630R fits, and the BC730R addresses the compatibility issue which that difference had caused.  Not for 12" Fada models such as 930.

Price $74.99

 

Custom Shop -- Items listed here are not Regular Production and are produced in smaller quantities.  Pricing for these Custom Shop parts will be higher than the prices of Regular Production items.
BC487R Reproduction back cover fits Philco model 48-700. 

Price $129.99

 

 

 

BC241R Reproduction back cover fits RCA model 8T241 and many of its variants.  Note:  Original was masonite, reproduction is metal. 

Price $99.99

 

HV241R Reproduction high-voltage cage cover fits RCA models using the 24-tube KCS-28 series chassis, including 8T241, 8T243, 9T246, etc. 

Price $109.99

 

HV630R Reproduction high-voltage cage cover fits RCA models 630TS, 8TS30, Crosley models 307TA, 9-408 and other similar makes and models based on the 30-tube RCA KCS-20 chassis. 

Price $129.99

 

 

HV621R Reproduction high-voltage cage cover fits RCA model 621TS, chassis KCS-21.  (similar to HV721R, but without inside corner fillets)

Price $109.99

Order via Email

 

HV721R Reproduction high-voltage cage cover fits RCA models 721TS, 721TCS, 730TV1, 730TV2 and other similar makes and models based on the 21-tube RCA KCS-26 chassis design.  (similar to HV621R, but with inside corner fillets)

Price $109.99

Order via Email

 

BC105R Reproduction back cover for Motorola VT-105. 

Price $179.99

Order via Email

 

SPZ24R Reproduction Bottom (Service-Access) Panel for Zenith 24-tube 1960's Color TV chassis (24MC32, 24MC36, etc.) 

Price $139.99

 

Order via Email

 

SPZ25R Reproduction Bottom (Service-Access) Panel for Zenith 25-tube, 26-tube, and 27-tube 1960's Color TV chassis (27KC20, 26KC20, 25LC30, 25MC33, 25NC31, etc.) 

Price $139.99

Order via Email

 

Request a new unlisted Custom Shop Part via Email (requires original part or dimensioned drawing)

Mechanical Parts

We have established a working relationship with a Machine Shop specializing in "miniature" parts.  Among parts which can be Repaired are Tuning Shaft and Detent assemblies for RCA models 621TS, 630TS, 630TCS, 641TV, 721TS, 721TCS, 730TV1, 730TV2, and 8TS30 (RCA part numbers 71463 and 72743 for RCA KCS-20 and KCS-26 chassis respectively).  We had hoped to market actual Reproductions of these, however, we have been notified by the Machinists that prohibitive costs would be involved in reproducing the Detent Plate part of these assemblies.  Since failures of these assemblies rarely involve a need for replacement of the Detent Plate assembly (typical failures involve Shaft or Spring breakage, parts which can indeed be fabricated and installed for reasonable cost), we will soon offer Repair Service for broken RCA Tuning Shaft assemblies 71463 and 72743 via a Machine Shop in our local area.  Many other Control Shafts may also be candidates for Repairs or Reproductions.  Email us for more information.

Request a Machined Part via Email

Literature Requests

Service Literature may be ordered from:

Click the SAMS logo to search for your set's Service Literature